MARINE

DETAILING, CERAMIC COATINGS & WRAPS IN PLYMOUTH & CORNWALL

We provide experience and the right products to fully decontaminate your marine paint or gelcoat

JC is has a vast knowledge of marine finishes and has spent many years working within the marine sector in Devon and Cornwall.

Unfortunately we also see boats getting there annual power wash on haul out leaving a dirty paint/gelcoat after just a water wash

The worst is when we see that contamination being removed via machine polishing when all dirt should be correctly removed with cleaning Not polishing.

What is Involved in Detailing your Boat

INSPECTION VISIT

Firstly we want to see your Boat so a short visit to ensure Detailing can be undertaken safely to get the paint/Gel surfaces and wood trims and windows to their best possible gloss and shine before we lock that in with a coating

We will Inspect the paintwork/Gelcoat
Check how much paint/Gelcoat is left on the Boat to ensure there is enough to carry out Compounding and polishing.
Discuss and show some samples of paintwork, gelcoats and fabric that has been protected with Ceramic coatings and High End UV Wax's and Sealants

Express detailing external

Full safe wash of the entire vessel.
Iron and fallout remover used on any and all rusted areas and gelcoat/paint stains
Full very strong sugar based degreasing wash
1 Season spray Ceramic coating applied

Prices from £12/ft monohull and £18/ft for multihulls

Full detailing external

Full safe wash of the entire vessel.
Iron and fallout remover used on any and all rusted areas and gelcoat/paint stains
Full very strong water based degreasing wash
Single stage polish on all external gelcoat or painted surfaces
Hand Polish of all metal work on deck
all glass/windows cleaned and Hydrophobic sealant applied
1 season ceramic spray coating applied to gelcoat/painted surfaces( Full Ceramic coatings can be applied at this stage)

Prices from £15/ft monohull from £22.50/ft for multihulls

Full Internal detailing and ceramic coatings available on request

What is Involved in Ceramic coating

INSPECTION VISIT

Firstly we want to see your Boat so a short visit to ensure Detailing can be undertaken safely to get the paint/Gel surface to its best possible gloss and shine before we lock that in with a coating

We will Inspect the paintwork/Gelcoat
Check how much paint/Gelcoat is left on the Boat to ensure there is enough to carry out Compounding and polishing.
Discuss and show some samples of paintwork that has been protected with Ceramic coatings and High End UV Wax Sealants

2 year Ceramic Coating by System X Extreme SS

Consists of a full Detail and deep clean prior to starting a coating Then we apply System X Extreme Super Slick ceramic coating.

Decontamination wash using PH neutral and water based degreasers and fallout removers. Then the surface is clay bared to remove embedded contaminants, before machine polishing from heavy cut compounds up to fine finishing for that deep high end gloss.

one polishing is complete usually day 2 the surface is sealed with a Ceramic coating to give ease of cleaning and the very best surface protection for the next 2 seasons. This can be followed up in 2 years with further coatings as long as the vessel has been well looked after with very little work or polishing required.

5 year Ceramic Coating System X Max warranty available

As above but we apply a 5 year coating to the vessel to give much longer peace of mind.

1 Season System X Renew 9 months Ceramic Spray sealant or a leading Ceramic UV Wax

As above but we apply a sealant or wax to the vessel ideally suited to smaller vessels that are not in the elements and not in constant use.